This page may contain affiliate links. If you buy from a link, we may earn a small commission. Learn more.

This page may contain affiliate links. If you buy from a link, we may earn a small commission. Learn more.

9 Quick & Easy Ways To Clean Your Shark Vacuum Hose


Shark vacuum hoses are subject to a lot of wear and tear. Over time, they can become clogged with dirt, dust, and other debris. If not cleaned on a regular basis, this can lead to poor suction power and decreased performance. In this article, we’ll show you how to clean a Shark vacuum hose in just a few simple steps.

Tools and Materials Needed:

  • Shark vacuum hose
  • Warm water
  • White vinegar or distilled white vinegar
  • Soft cloths or sponges
  • Bucket (optional)

Instructions to Clean Your Shark Vacuum Hose

1. Start by unplugging your Shark vacuum cleaner from the power outlet. This is important for safety reasons. You don’t want to be operating the vacuum cleaner while it’s still plugged in.

2. Next, detach the hose from the vacuum cleaner. Depending on your model of Shark vacuum, this may require pressing a release button or squeezing a release lever. Consult your owner’s manual for specific instructions.

3. Once the hose is detached, you can begin running water through it. Start with warm water first. If the hose is extremely dirty, you may need to use hot water. Just be careful not to scald yourself.

4. As you’re running water through the hose, use your hands to move it around and agitate any debris that may be stuck inside.

5. Once the water coming out of the hose runs clear, it’s time to add vinegar. Vinegar is a natural cleaning agent that will help to break down any stubborn dirt or debris.

6. To add vinegar, simply pour it into the hose. Again, how much you’ll need will depend on how dirty the hose is. A 50/50 mixture of water and vinegar is usually sufficient.

7. Allow the vinegar and water mixture to sit in the hose for a few minutes before flushing it out with clean water.

8. Once you’ve flushed the hose out with clean water, use a soft cloth or sponge to wipe down the outside of the hose. This will remove any residue that may be left behind from the cleaning process.

9. Finally, reattach the hose to your vacuum cleaner and plug it back in to the power outlet. Your Shark vacuum hose is now clean and ready to use.

Cleaning your Shark vacuum hose on a regular basis will help to ensure that your vacuum cleaner performs at its best.

Scroll to Top